Grass Valley CameraMan Control Keypad - Manual (Page 8)

Page 5 Configure Your 3-CCD Camera Control Keypad
Maximum Pan and Tilt Configuration
Now that you’ve learned how to program the pan arrows to meet your application’s needs, you can customize further how your
Camera Control Keypad works with your CameraMan system.
180° Default PAN Settings
50° Default TILT Settings
359° Maximum Pan Settings
Maximum Pan/Tilt Travel
Once the CameraMan Camera is installed, you can configure the PAN/TILT settings to suit
your application. The CameraMan camera has a maximum PAN range of 359°, but comes
programmed with factory default settings for maximum PAN/TILT settings of ±90° of PAN
and ±25° of TILT. You can do the following to change the maximum position settings:
1. Select the camera you wish to adjust (see page 6).
2. Press and hold ENTER.
3. While holding ENTER, use the PAN/TILT arrows to move the camera to the
maximum desired position in a given direction.
4. Release ENTER to set the maximum desired position for that direction.
5. Listen for two beeps to indicate that the maximum position for that direction
has been set.
6. If desired, repeat steps 2-5 to set all maximum positions (left, right, up, and down).
7. If desired, repeat steps 1-6 for additional cameras.