Grass Valley CameraMan Control Keypad - Manual (Page 5)

Page 2 CameraMan ® 3-CCD Camera Control Keypad Operations Manual
Buttons and Controls
Take a look at the front of your Camera Control Keypad. Here, you will find all the buttons required to control the pan, tilt, zoom
FOCUS, and IMAGE, as well as store up to 125 presets and adjust camera settings.
▼ IMAGE Buttons (Brightness/Darkness) –
Used to brighten and darken the picture.
Camera Setup Mode:
• W. Balance Button (Brightness) – Used to
automatically white balance the camera.
▼ autoIMAGE Buttons – Used to enable the
camera to adjust the brightness and darkness
for each camera view automatically.
▼ Focus Buttons – Used to change the focal
point of the camera lens.
▼ ON Light – indicates that the Keypad is
operational.
▼ Pan/Tilt Arrows – Controls the camera’s
up/down, and left/right movement.
Camera Setup Mode:
• Menu Edit Buttons – Used to
navigate through, and adjust, the
camera settings found in the on-screen
menus.
▼ Location Preset Controls – Used to select
from 1-125 Location Presets.
Camera Setup Mode:
• Setup Button (1) – Used, when
pressed simultaneously with Mode
(Enter) Button to turn the keypad’s
▼ Camera Select – Used to select between,
and control multiple cameras (see page
6).
▼ Zoom Buttons (In/Out) – Used to control the
tightness of the camera view.
Camera Setup Mode:
• Menu (Zoom IN) – Used to toggle the
on-screen menu display on and off.
• Bars (Zoom OUT) – Used to toggle the
on-screen color bars on and off.
▼ Enter – Used to enter, or change a camera
location preset.
Camera Setup Mode:
• Mode Button (Enter) – Used, when
pressed simultaneously with Setup
(Location Preset Button 1) Button to turn
the keypad’s Camera Setup Mode on
and off.