Grass Valley CameraMan Control Keypad - Manual (Page 14)

Page 11 Use Your 3-CCD Camera Control Keypad
Location Presets
Working With Location Presets
What are Location Presets?
Location Presets are stored locations that can be recalled using the Camera Control Keypad.
Each Location Preset memorizes and stores the following camera control functions:
• PAN/TILT position
• ZOOM perspective
• IMAGE setting
• FOCUS setting
To Set or Change a Location Preset
1. Select the camera you want to program using the CAMERA SELECT buttons.
(If only using one camera, press CAMERA SELECT 1).
2. Use the PAN/TILT arrows to move the camera to the desired location.
3. If desired, use the manual ZOOM buttons to set the needed Zoom perspective.
4. If desired, use the manual IMAGE buttons to set the needed light/dark contrast.
5. If desired, use the FOCUS buttons to change the camera’s focal point.
6. Input the Location Preset number (1–125).
7. Press and hold ENTER until you hear two beeps. The two beeps indicate the Location
Preset has been stored.
To Recall a Location Preset
1. Select the camera of choice (if only using one camera, press CAMERA SELECT 1).
2. Input the Location Preset number (1–125).
3. Press and release ENTER.
The CameraMan camera moves to the memorized location and recalls the information
stored for that Location Preset.
To move quickly from shot to shot using the Camera Control Keypad, use the Location Preset function on the keypad. With Location
Presets, you can store and recall up to 125 predetermined locations.
Step 1
Step 2
Step 3 Step 4
Step 5
Step 6
Step 7