Equinox Systems ZyAIR G-200 - Manual (Page 35)

ZyAIR G-200 User’s Guide
Using the ZyAIR Utility 2-17
Figure 2-15 802.1x Authentication
Follow the instructions in the table to configure 802.1x authentication.
Table 2-7 802.1x Authentication
FIELD DESCRIPTION
Authentication Select 802.1x from the drop-down list box.
EAP Type Select an EAP Type from the drop-down list box. See Types of EAP Authentication
in the Appendix of this User’s Guide for information on the fields listed below:
EAP-TLS
EAP-TTLS
EAP-MD5
EAP-PEAP
LEAP
Login Name Enter a user name.
This is the user name that you or an administrator set up on the RADIUS server.
Password Enter the password associated with the user name above.
Validate Server
Certificate This field is not available when you select EAP-MD5 or LEAP from the EAP Type
list. The server presents a certificate to the client. After validating the identity of the
server, the client sends a different certificate to the server. Select the check box to
have your server validate this certificate.
OK Click OK to apply the changes and close the screen.
2.7 The About Screen
The About screen displays related version numbers of the ZyAIR.