Grass Valley 8964MON - Manual (Page 24)

24 8964MON Instruction Manual
Configuration
I/O Config Web Page
The I/O Config web page ( Figure 12 ) shows the rear input and output con-
nections to the module and allows you to name each input. Type the
desired input name (up to 11 characters) into the corresponding box. The
status of each input is indicated by the color of the display.
Note Outputs are not monitored in this application.
SNMP trap reporting of each channel input can be enabled or disabled by
selecting or deselecting the corresponding checkbox in the
Reporting
column. You may disable reporting for channels not being used if desired.
The
Reporting column is also used when an SNMP monitoring application
such as NetCentral is installed.
Refer to Status Monitoring on page 35 for an explanation of the color coding
and using an SNMP monitoring application.
Figure 12. 8964MON I/O Config Web Page
Use
this
link