Grass Valley 8945EDA v.1.0.0 - Manual (Page 17)

8945EDA and 8945EDA-D Instruction Manual 17
Remote Configuration
8945EDA and 8945EDA-D Links and Web Pages
The 8900 GUI provides the following links and web pages for the 8945EDA and
8945EDA-D modules (
Figure 8 ):
• Status – reports input signal and frame bus communication status and module
information (
page 17 ),
• Settings – allows the configuration of the inputs and outputs ( page 19 ),
• Slot Config – provides the slot identification, the memory slot and the reports
for the frame health and the SNMP trap.(
page 21 ).
Figure 8. 8945EDA-D Web Page Links
Status Web Page
The Status web page ( Figure 9 on page 18 and Figure 10 on page 18 for 8945EDA
and 8945EDA-D shows the signal status of the input signal(s) and communication
with the frame bus. Color coding of the display indicates the signal status. Refer to
Web Browser Interface
on page 15 for an explanation of the color coding.
Note On the 8945 module, input signals are represented by one or two input signal
arrows. If the status of either input signal changes, it will be reflected in the
color status of the arrow and the Status LED on the module web pages. To
determine specific signal status for DA 1 or DA 2, refer to the Status web
page or the on-board LED.
Under the “Status” title are given the model, the description and the frame location.
Below, the graphic shows the input and output signals. If the status of either input
or output changes, it will be reflected in the color status of the arrow and the status
LED on the module web page.
Information about the module, such as part number, serial number, hardware revi-
sion, software version, and Asset Tag number are given in a Properties section at
the bottom of the display.
Note 1. The double-bar gives the error message (if applicable).
2. The color of the LED present on the top left of each web page is managed
by the 8900NET accordingly to alarms status.
Use
this
link