Grass Valley 8920MUX - Manual (Page 29)

8920MUX Instruction Manual 29
Configuration
Audio Matrix
When Synchronization is set to Synchronous with matrix control mode
(syn.matrix) as described in
Audio Group Management on page 27 , the Audio
Matrix page (see Figure 13 ) allows you to switch any one of the four input
audio channels from the selected audio group (G1, G2, G3, or G4) into any
or all of the output audio channels.
Pull-down menus allow you to select any of the four input channels
(AES1A, AES1B, AES2A, or AES2B) for insertion in each of the output chan-
nels.The Input/Output map indicates the selected input channel by
placing an
X in the appropriate input row for each output column.
When Synchronization is set to Synchronous (syn.AES) or Asynchronous
(asyn.AES) modes, the display will show only the default channel assig-
ments.
Figure 13. Audio Matrix Display
Use
this
link