Grass Valley 8920ADC v.2.0.1A - Manual (Page 26)

26 8920ADC Instruction Manual
Configuration
User Settings Web Page
The User Settings web page ( Figure 11 ) allows you to set the following
parameters:
• Select the Get Factory Defaults button to return the module to factory set-
tings (Operation output mode to default, all audio levels to 0 dB, and
Monitor Audio Input mode to disabled).
• Set Monitor Audio Inputs to enable or disable the status reporting of
the audio inputs. When set to disabled, the Input Signal(s) arrow on the
Status web page will be greyed out.
Figure 11. 8920ADC User Settings Web Page
Use
this
link