Grass Valley 8920ADC v.2.0.1A - Manual (Page 13)

8920ADC Instruction Manual 13
Configuration
Configuration
The 8920ADC can be configured locally using onboard switches or
remotely using the 8900NET network interface GUI or a networked
Newton Control Panel.
Refer to the following sections for configuration instructions:
• Configuration Summary ( page 13 )
• Local Onboard Module Configuration ( page 18 )
• Remote Control and Monitoring ( page 19 )
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8920DAC module.
Table 6 on page 17 provides a summary in table
format of all parameters and their ranges, default values, and remote, local,
and control panel function names and locations for setting each value.
The following parameters must be set on the 8920ADC module:
• Output level (Left and Right) – coarse and fine adjustment of analog
input levels for full scale digital outputs,
• Output mode – such as channel swapping, summing, tone and phase
inversion, and