Grass Valley 8900NET v.3.2.2 - Manual (Page 34)

34 8900NET Instruction Manual
Using the 8900NET GUI
8900NET Module Configuration Web Page
The 8900NET Configuration web page provides the following:
• A reboot button,
• SNMP Agent setup installation, and
• An Asset Tag identifier field.
Reboot Module
You may reboot the 8900NET module by selecting the reboot button at the
top of the page. A reboot can also be done on the Network web page.
SNMP Agent Installation
To use SNMP, the SNMP Agent software must be installed on the 8900NET
module. The Configuration web page shown in
Figure 19 is displayed if the
agent software has not already been installed.
When SNMP Agent software is installed on the 8900NET module, enabled
status reports are sent to an SNMP Manager such as the Grass Valley’s Net-
Central application. Refer to
Alarms and SNMP Monitoring on page 18 for
more information.
Click on the Install SNMP Agent button to view the license agreement.
Figure 19. Configuring the 8900 Network Module for SNMP
Use
this
link