Grass Valley 8900NET v.3.2.2 - Manual (Page 10)

10 8900NET Instruction Manual
Installation
To install the 8900NET module in the frame:
1. Insert the module, connector end first (see Figure 4 ), with the
component side of the module facing to the right side of the frame.
Instead of an ejector tab, the 8900NET module has a connector tab with
a circular finger-hole for pulling the module.
2. Verify that the module connector seats properly and securely against
the backplane.
Figure 4. Module/Frame Orientation
0612 -16
S1
8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1
Configuration DIP switches
Component side