Grass Valley 8901 - Manual (Page 18)

18 8901/8902/8906 Instruction Manual
Remote Monitoring
Remote Monitoring
8906 module monitoring can be performed using a web browser GUI inter-
face when the 8900NET Network Interface module is present in the Gecko
8900TFN-V frame. Remote monitoring is not possible with the 8500 or 8800
frames. This section describes the GUI access to the available module func-
tions.
Refer to the 8900NET Network Interface Module Instruction Manual for infor-
mation on the 8900NET Network Interface module and setting up and
operating the Gecko 8900 frame network.
Note For optimal performance and access to the latest features, it is recommended
that the 8900NET module be updated to the latest software release. Check the
Grass Valley web site for the current 8900NET software.
Refer to the Frame Status page shown in Figure 8 on page 19 . The 8900
modules can be addressed by clicking either on a specific module icon in
the frame status display or on a module name or slot number in the link list
on the left.
Note The physical appearance of the menu displays on the web pages shown in
this manual represent the use of a particular platform, browser and version
of 8900NET module software. They are provided for reference only. Displays
will differ depending on the type of platform and browser you are using and
the version of the 8900NET software installed in your system.
Use the Refresh button to update the display (available with 8900NET soft-
ware version 3.2.0 and later).
The Online Manual Link button can be set up to link to the documentation in
pdf format. Link configuration is done on the Frame Configuration page.
For information on status and fault monitoring and reporting shown on the
Status page, refer to
Status Monitoring on page 30 .