Grass Valley 8900FSS - Manual (Page 9)

8900FSS Instruction Manual 3
Installation
Termination Selection
Before installing the host module in the frame, verify the correct reference
signal termination selection is set using the jumpers JP3 and JP4 on the sub-
module (see
Figure 2 ). In most applications of the 8900FSS the 75 Ω position
is used. Refer to documentation for the host module for the recommended
termination selection.
Figure 2. Reference Signal Termination Selection
8900FSS
0588-03
Temination
jumpers in
75Ω position
High
Impedance
position
JP3 NTSC
Ref.
JP4 PAL
Ref.
75
75
HI IMP
HI IMP
75
HI IMP
75 Ω
position
75
HI IMP