Grass Valley 2042EDA - Manual (Page 12)

6 2042EDA Instruction Manual
2042EDA Dual Wideband Equalizing Distribution Amplifier
Power Up
The on-board LED indicators are illustrated in Figure 6 . Upon power-up,
the green PWR LED should light and the yellow CONF LED should illumi-
nate for the duration of module initialization.
Operation Indicator LEDs
With valid input signals connected to In 1 and In 2, the green on-board
PWR LED, SIG 1 PRES LED, SIG PRES 2 LED and the SIG LED (visible from
the rear of the passive rear module) should be on. The FAULT LED should
be off.
Refer to Table 1 on page 7 to see a complete list of possible operating con-
ditions and the resulting indicator status.
Figure 6. 2042EDA Indicator LEDs
8066_04
SIG 2 PRES
SIG 1 PRES
FAULT (red)
COMM (yellow)
CONF (yellow)
PWR (green)
SIG 2 PRES (green)
SIG 1 PRES (green)