H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 9)

3
Then, the user login interface appears, as shown in Figure 3 . Enter your username and password, and
then click Login. If the authentication code feature is enabled, you also need to enter the authentication
code, as shown in
Figure 4 .
If you select the check box before Save current user name, the input username is saved and you can
select it from the Username dropdown list at the next login. To switch to the interface in simplified Chinese,
click the language link at the top right corner.
CAUTION:
•
At initial login, you need to use the initial password provided by your administrator. Change the
password immediately after login. Click the Configure button at the top right of the page to enter the
personal information configuration page to change your password.
• For the first login to the SSL VPN system that has multiple domains, you need to click Option and select
the domain you want to log in to. You can log in to the same domain afterwards without making such
a selection.
• When you log in to an SSL VPN on the same host, if the language of the interface has been switched,
you must clear the cache of the browser. Otherwise, English and Chinese will appear on the pages at the
same time.
Figure 3 SSL VPN login page