H3C Technologies H3C MSR 800 User Manual
Introduction to installation accessories 安装附件介绍, Tool list 工具参考

Introduction to Installation Accessories 安装附件介绍
Wear an ESD wrist strap, and make sure the wrist strap has a good skin contact and is well
grounded.操作者需佩戴防静电腕带,确保防静电腕带与皮肤良好接触,并确认防静电腕带
已经良好接地。
The installation tools are not provided with the device. Prepare them yourself.
设备不随机提供安装工具,请用户根据实际安装需求自己准备安装工具。
1
Cage nut
(user supplied)
浮动螺母(用户自备)
Ring terminal
(provided)
接地端子(标配)
M6 screw
(user supplied)
M6 螺钉(用户自备)
M4 countersunk-head screw
(provided)
M4 沉头螺钉(标配)
H3C MSR800 Routers Installation Quick Start-6PW101
H3C MSR800
-6PW101
Tool List 工具参考
Rubber pads
(provided)
脚垫(标配)
mounting bracket
(optional)
挂耳(选配)
Grounding screw
(provided)
接地螺钉(标配)
Mounting the Router on a Workbench 安装路由器到工作台
Wall Mounting 壁挂安装
2
Flathead screwdriver
一字螺丝刀
Phillips screwdriver
十字螺丝刀
Needle-nose pliers
尖嘴钳
Wire-stripping pliers
剥线钳
ESD-preventive wrist strap
防静电腕带
Blow dryer
热吹风
Drill
电钻
Claw hammer
羊角锤
Marker
记号笔
Diagonal pliers
斜口钳
WIFI antenna
WIFI天线
Screw and anchor kit
( User supplied )
螺钉和安装导管
(用户自备)
Stick the rubber pads to the
appropriate positions on the
router bottom
将脚垫粘贴到路由器底部
≥ 22 mm(0.87in)
≥ 1.5 mm
(0.06in)
160m
m 6
.30in
When you mount the router on a wall, position the router so the Ethernet ports face
downwards, and the sides with ventilation openings are perpendicular to the ground.
安装时请将设备的以太网口朝下,设备带通风孔的两个侧面与地平面垂直。
1
2
3
4
5
6