H3C Technologies H3C MSR 3600 - Manual (Page 2)

3
Mounting the Router to a Rack 安装路由器到机柜
Install front mounting brackets and the load-bearing screws for rear mounting brackets.
在路由器两侧安装前挂耳和后挂耳承重螺钉
Install cage nuts and rear mounting brackets.安装浮动螺母及后挂耳
The figure shows how
to install rear mounting
brackets on an MSR
36-10/36-40.
安装
MSR 36各款型路
由器时需要在机柜上安
装后挂耳，以安装
MSR
36-10和36-40为例
Determine the positions
of cage nuts for
mounting front mounting
brackets, and mark the
positions.
确定前挂耳浮动螺母安
装孔位，用记号笔标记
Supplied mounting brackets and the installation modes depend on your device
model. 对于不同款型的设备，标配挂耳及挂耳的安装方式不同，安装挂耳到路由器
时请按照实际情况进行选择。
MSR 36-10/36-20
MSR 36-40
1U
2U
4
Mount the router to the rack.
安装路由器到机柜
MSR 36-60
Router depth smaller than
rack depth.设备深度小于机
柜深度时
Router depth greater than
rack depth
Exchange left and right rear
mounting brackets.设备深度
大于机柜深度时，左右后挂
耳对调