H3C Technologies H3C S3100V2 Series Switches - Manual

About the H3C S3100V2 configuration guides
The H3C S3100V2 configuration guides are part of the H3C S3100V2 documentation set. These guides
describe the software features for the H3C S3100V2 Switch Series Release 5203P05, and guide you
through the software configuration procedures. These guides also provide configuration examples to
help you apply the software features to different network scenarios. The H3C S3100V2 documentation
set includes 9 configuration guides:
Configuration guide Content
Fundamentals Configuration Guide
Describes how to use the command line interface of the switch, log in to
and set up the switch, and use the basic management functions. This
guide includes:
• Using the CLI
• Login overview
• Logging in to the CLI
• Logging in to the Web interface
• Logging in through SNMP
• Controlling user logins
• FTP
• TFTP
• Managing the file system
• Managing configuration files
• Upgrading software
• Managing the device
• Automatic configuration
Layer 2—LAN Switching
Configuration Guide
Covers Layer 2 technologies and features used on a LAN switched
network, such as VLAN technology, port isolation, MSTP. You can use
these features to divide broadcast domains, remove Layer 2 loops,
isolate users within a VLAN, transmit customer network packets through
the public network, and modify VLAN tags for packets, and so on. This
guide includes:
• Ethernet interface
• Loopback and null interfaces
• Bulk interface configuration
• MAC address table
• MAC information
• Ethernet link aggregation
• Port isolation
• Spanning tree
• BPDU tunneling (available only on the S3100V2-EI)
• VLAN
• Voice VLAN (available only on the S3100V2-EI)
• GVRP
• QinQ
• VLAN mapping (available only on the S3100V2-EI)
• LLDP
• MVRP