H3C Technologies H3C S5560 Series Switches - Manual (Page 10)

6
Figure 5 Connecting the AC power cord
2. As shown in Figure 6 , use a cable tie to secure the power cord to the handle of the power module.
Figure 6 Securing the AC power cord
3. Plug the other end of the AC power cord into the socket strip of the power source, and turn on the
circuit breaker of the power source.
4. Examine the LED on the power module. If the input status LED (AC OK) is steady green, the power
cord is successfully connected. If the LED is off, examine the installation conditions, troubleshoot
the problems, and try again until the LED is normal.
Removing the power module
To avoid bodily injury or device damage, follow the steps in Figure 7 to remove the power module.