H3C Technologies H3C S5560 Series Switches User Manual
Page 2
Configuration guide Content
Layer 2—LAN Switching
Configuration Guide
Covers Layer 2 technologies and features used on a LAN switched
network, such as VLAN technology, port isolation, and spanning tree.
You can use these features to divide broadcast domains, remove Layer
2 loops, isolate users within a VLAN and so on. This guide includes:
•
Ethernet interface
•
Loopback, null, and inloopback interfaces
•
Bulk interface configuration
•
MAC address table and MAC Information
•
Ethernet link aggregation
•
Port isolation
•
Spanning tree
•
Loop detection
•
VLAN (including VLAN, super VLAN, private VLAN and voice
VLAN)
•
MVRP
•
QinQ
•
VLAN mapping
•
LLDP
•
Service loopback group
Layer 3—IP Services Configuration
Guide
Describes how to configure ARP, IP addressing, IP performance
optimization, IP forwarding basics, IPv6 basics, DHCP, DNS, UDP
helper, DHCPv6, tunneling, and GRE. This guide includes:
•
ARP (ARP, gratuitous ARP, proxy ARP, and ARP snooping)
•
IP addressing
•
DHCP (DHCP overview, DHCP server, DHCP relay agent, DHCP
client, DHCP snooping, and BOOTP client)
•
DNS (DNS and DDNS)
•
IP forwarding basics (Basic IP forwarding on the device and load
sharing)
•
Fast forwarding
•
IRDP
•
IP performance optimization
•
UDP Helper
•
Basic IPv6 settings
•
DHCPv6 (DHCPv6 overview, DHCPv6 server, DHCPv6 relay agent,
and DHCPv6 snooping)
•
IPv6 fast forwarding
•
Tunneling
•
GRE