beautypg.com

Installing and removing a power module, Installing the power module – H3C Technologies H3C S5560 Series Switches User Manual

Page 10

background image

5

Installing and removing a power module

NOTE:

Before installation, make sure the power module model is as
required. For more information, see the installation guide of the
device.

Installing the power module

To avoid bodily injury or device damage, follow the steps in

Figure 2

to

install the power module.

Figure 2 Installation procedure

1.

Put on the ESD-preventive wrist strap, and make sure the strap
makes good skin contact and is well grounded.

2.

Unpack the power module and verify that the power module
model is as required.

This manual is related to the following products:
See also other documents in the category H3C Technologies Routers: