H3C Technologies H3C S6800 Series Switches - Manual (Page 4)

4
For more information about H3C QSFP+ transceiver modules, QSFP+
DAC cables, and QSFP+ to SFP+ DAC cables, see H3C Transceiver
Modules User Guide at www.h3c.com.
LEDs
Table 6 describes 10GBASE-T port LEDs. Table 7 describes QSFP+ port
LEDs.
Table 6 10GBase-T port LED description
LED status Description
Steady green
The port is operating at 10 Gbps, and a link is
present on the port.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow
The port is operating at 1 Gbps, and a link is
present on the port.
Flashing yellow The port is sending or receiving data at 1 Gbps.
Off No link is present on the port.
Table 7 QSFP+ port LED description
LED status Description
Steady green
A transceiver module is installed in the port. The
port is operating at 40 Gbps, and a link is present
on the port.
Flashing green The port is sending or receiving data at 40 Gbps.
Steady yellow
A transceiver module is installed in the port. The
port is operating at 10 Gbps, and a link is present
on the port.
Flashing yellow The port is sending or receiving data at 10 Gbps.
Off
No transceiver module is installed in the port, or
no link is present on the port.
NOTE:
The 10GBASE-T port LEDs and QSFP+ port LEDs are not affected by
the port mode switching button on your switch. For more information
about the port mode switching button, see the installation guide of the
switch.