Ensemble Designs BrightEye 5 Analog Composite TBC and Frame Sync - Manual (Page 14)

www.ensembledesigns.com BrightEye 5 - Page 14
5 Analog Composite TBC and Frame Sync User Guide
BrightEye 5 Timing Menu
Timing Menu
The Timing menu is used to time the input signal to an external reference.
• Ver Time – Adjust the vertical timing of the signal in lines with reference to the Frame Sync
input. Default is 0 lines.
• Hor Time – Adjust the horizontal timing of the signal in clocks with reference to the Frame
Sync input. Range is -1700 - 1700 clocks, default is 0 clocks.
• Fine Phase – Adjust the fine phase of the signal in subpixels with reference to the Frame Sync
input. Range is -100 - 100 subpixels, default is 0 subpixels.
• Frame Sync – Set the Frame Sync function On to genlock to the external reference input to
the module or Off for no Frame Sync.