Ensemble Designs BrightEye 83 HDMI to 3G / HD / SD SDI Converter - Manual (Page 8)

www.ensembledesigns.com BrightEye 83 and 83-F - Page 8
83 and 83-F HDMI to 3G/HD/SD SDI Converters
Power Connection
Connect the modular power supply (ED part number 23118900) to the 12-volt DC power input
connection on the far left of the unit. Use the locking ring to secure it.
HDMI Connection
Connect your video source to the BrightEye 83 or 83-F HDMI Input.
USB Connection
Your BrightEye 83 or 83-F comes with a USB cable, shown below. Connect the USB port to a PC or Mac
running BrightEye software for more comprehensive monitoring and upgrades to the unit. BrightEye
PC/Mac control application software is included on CD that came with your BrightEye, or
the application can be downloaded for free at the following link:
www.ensembledesigns.com/support/brighteye-support
USB cable that is included with your BrightEye
SDI Outputs
The SDI Output BNCs output the same signal on both BNCs. The Output Standard follows the Input
Standard. Connect to a video destination such as a router, production switcher, or broadcast monitor.
Example of a BNC cable