Ensemble Designs BrightEye 83 HDMI to 3G / HD / SD SDI Converter - Manual (Page 5)

www.ensembledesigns.com BrightEye 83 and 83-F - Page 5
83 and 83-F HDMI to 3G/HD/SD SDI Converters
Functional Description and Block Diagram
As shown in the functional block diagram below, HDMI is fed to the BrightEye 83 or 83-F on an
HDMI 1.3 connector. Whan a valid input is detected it is converted to 3G, HD or SD SDI. 8 channels of
incomming audio are supported and embedded in the SDI outputs.
BrightEye 83 provides two electrical SDI outputs (BNC). BrightEye 83-F provides two electrical SDI
outputs (BNC) and one optical output.
BrightEye 83 and 83-F are powered by a 12 volt DC universal power supply. This power supply can
accept an input voltage between 90 and 230 volts, at 50 or 60 Hertz.
BrightEye 83 and 83-F use a standard IEC line cord and can be used anywhere in the world. It is normal
for the converter to be quite warm to the touch when operating.
3G/HD/SD SDI Out
HDMI
Receiver
&
Color Space
Conversion
TRS
Insertion
Embedder
Serializer
3G/HD/SD SDI
Optical Out
(BE83-F Only)
HDMI In
3G/HD/SD SDI Out
Format
Detection
8 Channel
Audio Processor
Sample Rate
Conversion
Video Signal
Audio Signal
Clock
Regenerator
to LED’s and
BrightEye Mac/PC Application Software
to all circuits
BrightEye 83 and 83-F Functional Block Diagram