Ensemble Designs 7420 HD/SD Logo Inserter - Manual (Page 25)

Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control status menus for this module are illustrated and
explained below. Refer to the 7420 Parameter Table for a summary of available parame-
ters that can be set remotely through the menus illustrated. For more information on
using Avenue Touch Screen, refer to the Avenue System Overview operating section.
Parameter fields that are grayed out can indicate one of the following conditions:
• An option is not installed.
• The function is not active.
• The module is locked.
• The User Level set with Avenue PC is not accessible from the current User Level.
For information on installing and using the Avenue Logo application for downloading
logos and animations to the module, refer to the Avenue Logo data pack and CD that
accompanies the 7420 module.
7420 Avenue Touch Screen Menus
The Program A menu screen shown below allows you to control the two keyers, select
Cut or Mix, and set the transition Rate (or duration). Program A is output on the BNCs
labeled Program 1, Program 2, Program 3, and Program 4.
When the module is in Pgm/Pvw Mode or Key/Fill Mode, then the Program A menu is
similar in functionality to the Cut and Mix buttons on a production switcher.
The following are examples of how to use the Program A menu:
If Key 1 is on and you want to cut it off, press Cut 1. If Key 1 is off and you want to cut it
on, press Cut 1.
If Key 1 and Key 2 are both off and you want to cut them on together, press Cut All.
If Key 1 is on and Key 2 is off and you want to swap so that Key 1 is off and Key 2 is on,
press Cut All.
If Key 1 is off and Key 2 is on and you want to transition so that Key 1 is on and Key 2 is
off, press Mix All.
• Cut 1 – Push the Cut 1 button to cut Key 1 on or off.
• Mix 1 – Push the Mix 1 button to mix Key 1 on or off.
• Key 1 Status – indicates the status of Key 1. Possible values are: Key On, Key Off,
Mix On, and Mix Off. Mix On or Mix Off appears while the transition is occurring.
• Cut 2 – Push the Cut 2 button to cut Key 2 on or off.
• Mix 2 – Push the Mix 2 button to mix Key 2 on or off.
• Key 2 Status – indicates the status of Key 2. Possible values are: Key On, Key Off,
Mix On, and Mix Off. Mix On or Mix Off appears while the transition is occurring.
• Cut All – Push the Cut All button to cut both Key 1 and Key 2. If Key 1 and Key 2
are off, pushing Cut All will cut them both on. If Key 1 and Key 2 are on, pushing
Cut All will cut them both off. If Key 1 is on and Key 2 is off, pushing Cut All will
cut Key 1 off and cut Key 2 on.
7420-25
Model 7420 HD/SD Logo Inserter