Ensemble Designs 7420 HD/SD Logo Inserter - Manual (Page 13)

MODULE CONFIGURATION AND CONTROL
The configuration parameters for each Avenue module must be selected after installation.
This can be done remotely using one of the Avenue remote control options. This module
has no local front panel configuration controls.
Avenue module parameters can be configured and controlled remotely from one or both of
the remote control options, the Avenue Touch Screen or the Avenue PC Application. Once
the module parameters have been set remotely, the information is stored on the module
CPU. This allows the module be moved to a different cell in the frame at your discretion
without losing the stored information. Remote configuration will override whatever the
switch settings are on the front edge of the module.
For setting the parameters using the Avenue PC option, refer to the Avenue PC Remote
Configuration section of this document.
For setting the parameters using the Avenue Touch Screen option, refer to the Avenue
Touch Screen operating section in the Avenue System Overview section.
For setting the parameters using Avenue Logo HD Application Software, refer to the
Avenue Logo HD Application Data Pack. It includes information on the following
topics:
• Creating A New Project
• Adding Assets (logos, animations and audio clips)
• Adjusting Crop Settings and Key Settings
• Creating Events
• Outputting Projects to the 7420 module
Model 7420 HD/SD Logo Inserter
7420-13