Ensemble Designs 7110 HD/SD/ASI Reclocking Distribution Amplifier - Manual (Page 12)

www.ensembledesigns.com
Page 12
Model 7110 HD/SD/ASI and Model 9110 3G/HD/SD/ASI Reclocking DA
9110
3G/HD/
SD/ASI
DA
3G In
HD In
SD In
SD In green LED
ON: SD signal is present and
equalized for all outputs.
OFF: No SD input, or the signal
may not be present or cable
equalization exceeds maximum
length allowed.
Run green LED
SLOW BLINK: System OK. (If SPI
control is active from the main frame
System Control Module, all Run
indicators will be synchronized.)
OFF: A power fault of halted CPU
ON: A halted CPU
FAST BLINK: CPU Run error
Pwr green LED
ON: Power present.
OFF: Power absent (+5V).
3G In green LED
ON: 3G signal is present and
equalized for all outputs.
OFF: No 3G input, or the
signal may not be present or
cable equalization exceeds
maximum length allowed.
9110 Front Panel Controls and Indicators
Each front edge indicator is shown in the diagram below:
HD In green LED
ON: HD signal is present and
equalized for all outputs.
OFF: No HD input, or the signal
may not be present or cable
equalization exceeds maximum
length allowed.