Ensemble Designs 5130 Digital to Analog Composite Converter with Digital DA - Manual (Page 9)

TROUBLESHOOTING
As a troubleshooting aid, the signal equalization and presence, power and CPU status can
be easily monitored from the front panel of this module using the indicators explained in
the previous section.
The following status items can be monitored using the Avenue Touch Screen Control Panel
or PC Application:
• Equalization (cable length)
• Power status
• Slot ID, Software Version and Board Revision
Refer to the overall troubleshooting tips given below for the 5130 module:
No status lights are lit on front panel:
• Check that frame power is present (green LED{s} on frame power supplies).
• Check that module is firmly seated in frame. Try removing it and plugging
it in again.
Can’t control module:
• Check status of CPU Run green LED. Should be blinking slowly and in
unison with other modules if System module is present. If not, try removing
it and plugging it in again.
• System module may not be working properly if installed.
No signal out of module:
• Check status of EQ green LED. Should be lit. If not, check the input signal
for presence and quality.
• Check cabling to input of module.
You may also refer to the technical support section of the Ensemble web site for the latest
information on your equipment at the URL below:
http://www.ensembledesigns.com/support
SOFTWARE UPDATING
Software upgrades for each module can be downloaded remotely if the optional System
Control module is installed. These can be downloaded onto your PC and then Avenue PC
will distribute the update to the individual module. (Refer to the Avenue PC documenta-
tion for more information) Periodically updates will be posted on our web site. If you do
not have the required System Control Module and Avenue PC, modules can be sent back
to the factory for software upgrades.
Model 5130 Reclocking Serial DA with Composite Monitor Outputs
5130-9