Ensemble Designs 5130 Digital to Analog Composite Converter with Digital DA - Manual (Page 6)

Front Panel Controls and Indicators
Each front edge indicator and switch setting is shown in the diagram below:
5130-6
Remote/Local switch:
Not used at this time.
Pwr green LED:
Indicates the presence (ON) or
absence (OFF) of power (+5V).
Run green LED:
OFF:
A power fault or halted CPU
ON:
A halted CPU
FAST BLINK:
CPU Run error
SLOW BLINK:
System OK. (If SPI control is
active from the main frame
System Control Module, all
Run indicators will be syn-
chronized.).
EQ OK green LED:
ON when signal is present
and equalized.
OFF when signal is not
present or cable equalization
exceeds maximum cable
length allowed.
525/625 green LED:
ON when EQ is OK and serial
receiver is successfully locked
to either the 525 or 625 data
stream clock.
OFF when EQ is not OK or
serial receiver cannot lock to
either data stream clock.
Model 5130 Reclocking Serial DA with Composite Monitor Outputs