Eneo IRLED-401E - Manual (Page 19)

19
DE
EN
FR
PL
RU
• Install the illuminator in a properly airy zone.
• Mount the BWHYP1 bracket ⓓ to the bracket ⓐ, using the screw and
the nut ⓔ.
• Place the bracket ⓓ in the desired position against the wall.
• To make this operation easier, it is possible to loosen the knurled hand-
wheel ⓑ or in case the nut opposite to the handwheel, and rotate the
bracket as to the illuminator.
• Mark the position of mounting holes.
• Make the mounting holes, taking into consideration the type of material,
which the wall is made of, and the type of fixings to be used.
• Mount the bracket ⓓ to the wall in a firm way.
If loosened during the bracket installation, please remember to tighten the
knurled handwheel ⓑ and/or the nut opposite to the handwheel.
D
A
E
28
44
60 105
6,5
6,5
D
Wall bracket mounting