Eneo VKCD-1416C User Manual

Page 43

4.2.7 SPECIAL

SYNC

Select internal or line lock mode. (DC power is internal sync only)

PHASE

Adjust sync phase in line lock mode.

D/N MODE

Select D/N, Color, BW.

D/N DELAY

Adjust the working time of the filter when D/N operated.

(5,10,20 sec)

HI-RES

Select high resolution mode. (LOW/MID/HIGH)

2DNR

Select 2D noise reduction level. (OFF/01~07)

3DNR

Select 3D noise reduction level. (AUTO/01~28)

AUTO : If the motion is detected, DNR level

becomes lower

automatically so "ghost" is decreased, on the other
hand, noise will be increased. On the opposit, if there
is no motion, DNR level is raised and noise will be
decreased.

WHITE DET

Press the Menu key to execute the White Pixel Detection function

and then the Iris will be closed automatically. When detection is

completed, the operation automatically returns to the normal state.

LEVEL

Adjust the threshold level from 1 to 15. (Default is 4)

4.2.8 EFFECT

This manual is related to the following products:

VKC-1416C