Eneo VKCD-1416C - Manual (Page 33)

8
2.3 BASE INSTALLATION
1. Make mounting holes and cable hole in the place (ceiling) to which this dome
camera is installed using the supplied template sheet.
Warning: The total mass of the main unit is approx 1.3kg. Check whether the ceiling to
which the Dome Camera is installed is strong enough to hold the unit mass.
If not, the Dome Camera could fall, causing injury.
2. Attach the safety wire for securing the dome camera to ceiling or structure
not to fall.
3. Extract each wire through the cable hole, wire the supplied power, RS-485
and alarm-in connecter .
4. Unlock torx screws (4x) the dome cover and fix the dome base firmly with
supplied mounting screws (4x), plastic anchors (4x), O-Rings (4x)
5. Adjust desired focus and scene by turning and moving the hemisphere by hand.
6. Lock the housing cover with torx screws (4x).