Eneo VKCD-1416C - Manual (Page 40)

15
NOTE 1 : When "ZOOM PRESET" is selected, you can adjust the preset zoom location
using the "tele" and "wide" buttons.
NOTE 2 : When after the zoom location has been selected press the "menu" button to
store the location.
4.2.2 WB (White Balance)
MODE
Select white balance mode.
(AWB/WAWB/INDOOR/OUTDOOR/MANUAL/CRS)
- AWB Auto white balance mode. (2500~9500'K)
- WAWB Wide range auto white balance mode. (1800~10500'K)
-INDOOR Indoor white balance mode.
-OUTDOOR Outdoor white balance mode.
-MANUAL Manual mode. You can change R and B Gain manually.
-CRS Color rolling suppression mode.
R GAIN Adjust R gain value. (0~255)
B GAIN Adjust B gain value. (0~255)
FRAME ADJ Since the color rolling path differs depending on the fluorescent
lamp used, adjust the color rolling frame for each fluorescent lamp.
So press Menu key to adjust frame and after about 10 seconds,
the adjust mode will be finished automatically and 'ENT' turns to
'END'.
4.2.3 AE (Auto Exposure)
MODE Select Exposure mode. (AUTO1/AUTO2/SHUT PRI/MANUAL)
-AUTO1 Auto exposure mode 1. (Use to normal surroundings : indoor)