Program and operation, Dome camera selection, Accessing the on-screen menu utility – Eneo HDD-2030PTZ1080 User Manual

Page 22: How to control the on-screen menu utility

Program and Operation

Dome Camera Selection

Before you program or operate a dome camera, you must select the dome camera by

pressing No. + CAM keys.

Example: Pressing 1 , 0 + CAM keys sequentially will select dome camera 10. The selected

dome camera ID will be displayed on the LCD monitor of the keyboard controller.

Accessing the On-Screen Menu Utility

You can call up the On-screen menu utility on your monitor by pressing the MENU key on

the keyboard controller, the following On-screen menu utility will appear:

How to control the On-Screen Menu Utility

Function

Button

Call the On-screen menu utility.

Navigate through the menu items.

Joystick up or down

Go into the sub-menu items.

Joystick left or right or IRIS Open

Change value.
Enter the editing title mode.

Joystick left or right or
Zoom handle twist or Tele , Wide

Change value of angle.

CTRL + Joystick

Enter the changing angle mode.

IRIS Open

Exit the changing angle mode.

IRIS Close

Escape (EXIT)

ESC