Eneo HDD-2030PTZ1080 - Manual (Page 16)

16
i NOTICE: It is recommended to remove camera window for improving picture quality
when you use bubble ring ass’y.
The dome camera is for use in surface mounting applications and the mounting surface
should be capable of supporting loads up to 4.5kg.
The dome camera’s base should be attached to a structural object, such as hard wood,
wall stud or ceiling rafter that supports the weight of the dome camera.
Figure 3 – Installation
Basic Configuration of Dome Camera System
Unlock
Lock
Lock
Surface (ceiling)
Plate Adaptor
Dome Camera
BNC Cable (Yellow Connector)
White
Brown
Black 3P
Red
Orange
Yellow
Green
Blue
Violet
RS-485 RX+
RS-485 RX-
GND
Alarm Input 1
Alarm Input 2
Alarm Input 3
Alarm Input 4
Alarm Output 1
Alarm Output 2