Eneo HDD-2030PTZ1080 - Manual (Page 19)

19
EN
Figure 8 - Termination Diagram
Setting Dome Camera Address (ID)
To prevent damage, each dome camera must have a unique address (ID).
The factory default setting is 1.
Refer to ‘Dome Communication’ section for detailed information.
Cable for communication
Termination ON
Termination ON
Dome 1 port Dome 2 port
Cable for communication Cable for communication
Cable for communication
Termination ON
Termination ON Termination ON
Input
Termination ON
Output
Termination ON
Repeater /
Splitter
1.2km
1.2km