Eneo HDC-2080Z03 - Manual (Page 15)

14
DISPLAY -
Enables or disables to display the OSD.
ID – ON enables to display the camera ID defined by SYSTEM>COMM.
SETUP>CAM ID.
TITLE – ON enables to display the camera title(name) set by SPECIAL>
TITLE SET.
ZOOM RATIO – ON enables to display the zoom ratio on the bottom right
corner. OZx.x appears during the optical zoom and DZx.x will display
by multiplying the optical zoom ratio and the actual digital zoom ratio.
FOCUS INDICATE – * mark on the bottom right corner indicates the
focusing status in blue during focusing and white after finishing.
DEFOG OFF
AUTO – Enhance the foggy video automatically according to
status of scene
MANUAL – Sets to enhance the foggy video manually regardless of
status of scene
LEVEL – LOW, MID, HIGH
Video quality can be less in normal environments.
6.6.1 MOTION ZOOM
MOTION ZOOM Default Descriptions
H-POINTER 10
Available to set Horizontal area of MOTION ZOOM.
Adjustable H-PONTER Value is 1 to 19
V-POINTER 10
Available to set Vertical area of MOTION ZOOM.
Adjustable V-PONTER Value is 1 to 19
O-ZOOM RATIO OX2.0 Adjust Optical Zoom Ratio (up to 3x) when motion is detected.
D-ZOOM RATIO DX1.5 Adjust Digital Zoom Ratio (up to 3x) when motion is detected.
MOTION ZOOM
H-POINTER
V-POINTER
O-ZOOM RATIO
D-ZOOM RATIO
RETURN
10
10
OX2.0
DX1.5
RET↵
MOTION ZOOM
H-POINTER
V-POINTER
O-ZOOM RATIO
D-ZOOM RATIO
RETURN
10
10
OX2.0
DX1.5
RET↵