Operating instructions – Eneo PXD-2080Z03 D User Manual
Page 20

Operating Instructions
20
NETWORK AF ZOOM CAMERA
SENS-UP
AUTO
AUTO – SENS-UP is enabled or disabled automatically by the
scene brightness.
OFF – Disables SENS-UP
WDR
OFF
WDR
Weight
MID
Improves the visibility for the high bright area and the dark area
by the double captures of image with LONG and SHORT exposures.
※
CVBS video signal - Connecting 2nd video to CVBS port
disables WDR function temporary. It should be considered when
installer adjusts the video with installation monitor via CVBS
video signal
WDR level can be selected from LOW, MID and HIGH.
Care should be taken to select this mode because video may
lose its quality in some environments by the over compensation.
BLC
(Back Light
Compensation)
ON – Improves the visibility for the dark object by the bright back
light. Outside area of BLC window be can over saturated.
Available to set BLC POSITION at ADVANCED CAMERA MENU>
BLC/HLC>BLC POSITION
HLC – Cuts out the highlight area with black mask and excludes
it from compensation. Lower HLC LEVEL cut out video from the
lower level. HLC LEVEL is adjustable at ADVANCED CAMERA
MENU>BLC/HLC>HLC LEVEL
OFF
3D-NR
3D-NR is a very sophisticated and powerful time-based noise
reduction technology by monitoring the noise for the several video
frames and defining and eliminating them consecutively at low light.
Higher setting reduces noise much more but results in losing
the sharpness and the tail effect or the motion blur for the fast
moving target at low light.
MID
DAY&NIGHT
EXT
for
IR LED
type
COLOR – Forcibly DAY/NIGHT is disabled and outputs color video.
AUTO – Used when DAY or NIGHT is determined by light level
through the lens and DAY from/to NIGHT is switched automatically
by the scene brightness.
When EXPOSURE>AGC is less than 12, DAY/NIGHT AUTO is
disabled and forcibly switches to _(DAY) to avoid the malfunction.
EXT, B/W(NIGHT) and COLOR(DAY) is independent on AGC
The brighter video can be obtained by increasing the exposure
time in the night with SENS-UP. SENS-UP is the maximum
integrations of frame by DSS(Digital Slow Shutter) in the low light.
AGC
10
AGC amplifies the video gain for brighter video but noise and
white pixel accordingly.
AGC level less than 10 disables AUTO in DAY/NIGHT