Eneo PXD-2080MIR D - Manual (Page 28)

28
Operating Instructions
MEGA-PIXEL NETWORK CAMERA
• H-POINTER (10): Moves MOTION ZOOM area(Yellow window) horizontally.
• V-POINTER (10):Moves MOTION ZOOM area(Yellow window) vertically.
• D-ZOOM RATIO (DZ X2.0): Sets the area size to be Digital zoomed when the
motion occurs in the black window.
• MOTION CHK COUNT (3) - SMART MOTION ZOOM is activated after the
motions in MOTION CHK COUNT are detected in a certain period.
For example, ‘1’ immediately initiates SMART MOTION ZOOM by the motion
detected once. High count number enables SMART MOTION ZOOM with
sureness but with delay and less sensitivity.
This camera has a very useful and powerful feature, POINTING ZOOM, which
can zoom in/out any area.
UNLIKE the conventional zoom which can zoom in/out the center area of image
only, by the programmable zoom location and area, POINTING ZOOM differentiates
its usefulness from others. That is, a conventional camera installed on the corner
of ceiling can zoom the center of the floor in a room and result in losing the image
of door on the side wall.
However, POINTING ZOOM can be set to see the door side and zoom in that
area without missing the IMPORTANT security point.
POINTING ZOOM can be activated by the joystick operations of ▲ for zoom in
and ▼ for zoom out or via web viewer.
▐ POINTING ZOOM
• H-POINTER (10): Sets the horizontal location of area to be zoomed by
POINTING ZOOM.
• V-POINTER (10) : Sets the vertical location of area to be zoomed by
POINTING ZOOM
POINTING ZOOM
H-POINTER
V-POINTER
RETURN 10
10
RET