Eneo PXD-2080MIR D - Manual (Page 23)

23
Operating Instructions
MEGA-PIXEL NETWORK CAMERA
Advanced Camera OSD menu
Click ‘ADVANCED CAMERA MENU’ bar at CAMERA CONTROL menu to activate
the camera OSD menu.
Click Up/Down/Left/Right bars to navigate or change the parameters.
These options have been pre-configured at the factory for optimal performance.
MENU V5.xx
PRIVACY
MOTION
TITLE SET
SMART IR
ZOOM MODE
HLC LEVEL
BLC POSITION
FOCUS ASSIST
EXIT ↵
OFF
↵
|::::::::::::::| 0
10
ON
SET
|:::::::|::: :::|
↵
↵
SAVE&EXIT ↵
1-1. BOX : Set area to select privacy zones by square.
1-2. POLYGON : Set area to select privacy zones by polygon shape
1-3. RETURN
Set the Privacy zones which can be enabled individually by BOX or POLYGON
are available to mask the video.
1. PRIVACY (default: OFF)
• ZONE NUM : Set a number to select a privacy zone from 1~10.
• ZONE DISP : ON enables a relevant privacy zone.
• H-POS, V-POS, H-SIZE and V-SIZE : Adjust the size and position of zone.
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.
• RETURN
• RET : Go back to the previous menu.
• SAVE&EXIT : Exits the menu after saving the parameters.
• EXIT : Exits the menu without saving the parameters.
• ZONE NUM : Set a number to select a privacy zone from 1~4.
• ZONE DISP : ON enables a relevant privacy zone.
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.
• RETURN