Eiki Network Board MD13NET - Manual (Page 46)

46
Controlling the Projector
Item Description
Remote Control ......Sets one of 2 types remote
control codes.
Lamp Counter
Reset
................Resets the lamp use-time.
Reset when replaced lamp.
P-TIMER ............Used to display the timer on
the screen. The status is
changed as OFF -> STOP ->
ON when this button is
pressed repeatedly.
Item Description
Actual Time ........Displays the current time set to
the projector.
Timer Setting ....Function to switch on or off the
projector at the programmed
date and time. Please see
chapter “How to set the
Timer” for further instructions.
About Lamp Counter reset
The confirmation window as the left will
appear when the Reset button of the “Lamp
Counter Reset” is pressed. Select which
lamp counter is to be reset with the radio
button and then press the
OK button.
(Set JavaScript On) (Set JavaScript Off)
✐ There are various kind of ways to change the JavaScript preference depending on the web
browser's version and application. Please refer to chapter “Appendix: Web browser
setting/Active Script (JavaScript enable)” on page 72.
* In case of 2 lamps model