Aqua Lung Apeks Regulator - Manual (Page 19)

US
19
Close the cylinder
valve, and then
purge the attached
second stages.
If you are in any doubt that the
1st stage has not be
de-pressurised completely,
remove the first stage and wait
20 seconds before re-attaching
and re-pressurising to check
the condition of the regulator.
Cold Water Diving
Note: During low temperatures & cold water diving the Status
LCD display will slowly appear faint, then become much brighter.
It is advised that you check your Status first stage regulator in
more ambient temperatures.
If The Status fails to display
Note: To re-check the Status, the regulator must be de-
pressurised by closing the cylinder valve and purging the second
stage regulator of gas, ensuring that the purge button is de-
pressed for a minimum of 20 seconds.
2
1
Regulator Owner’s Manual
............................................................................................