Aqua Lung Apeks Regulator - Manual (Page 18)

US
18
Status Condition Display Guide
KEY
Note: When using either a DST or FST Status first stage, it will be
necessary to fit the first stage upside down to check its condition.
Once this procedure has been completed the Status first stage
can then be depressurised and rotated into the required position.
Medium pressure too high “DO NOT DIVE!”
Medium pressure too Low “DO NOT DIVE!”
Regulator requires servicing Complete dive,
& ensure the status regulator is inspected
/ serviced by an Authorised Apeks service
technician.
HI -
LO -
SVC -
Once the Status has
displayed its condition,
close the cylinder valve
and depressurise the
regulator. Then rotate
the first stage into the
desired position.
First attach the first
stage to the cylinder
upside down. Then
slowly open the
cylinder valve and
wait for the Status
to display its
condition.
Regulator Owner’s Manual
............................................................................................