Epson 580 - Manual (Page 19)

18
L R4C627
Rev.C
A5 size Daily_UK.fm
12/1/00 Pass 0
Proof Sign-off:
K.Gazan
N.Nomoto
R.Thomson
Make sure that your computer is a Windows 98
or Windows 2000 pre-installed model
Your computer must be a Windows 98 pre-installed model, a
Windows 2000 pre-installed model, or a Windows 98 pre-
installed model that has been upgraded to Windows 2000. You
may not be able to install or run the USB Printer Driver on a
computer which is not equipped with a USB port or which has
been upgraded from Windows 95.
Make sure that EPSON USB Printer Devices
appears on the Device Manager menu (for
Windows 98 only)
If you canceled the plug-and-play driver installation before the
procedure was completed, either the USB printer device driver or
the printer driver may be incorrectly installed.
Follow the steps below to check the installation and reinstall the
drivers.
1. Plug in the power cord and then plug the USB cable into the
printer and the computer.
2. Right-click the My Computer icon on your desktop, then
click Properties.
3. Click the Device Manager tab.
If your drivers are correctly installed, EPSON USB Printer
Devices should appear on the Device Manager menu.
If EPSON USB Printer Devices does not appear on the Device
Manager menu, click the plus (+) sign beside Other Devices
to view the installed devices.