Epson 580 - Manual (Page 10)

9
R Proof Sign-off:
K.Gazan
N.Nomoto
R.Thomson R4C627
Rev.C
A5 size Daily_UK.fm
12/1/00 Pass 0
En
gl
ish
❏ Make sure the printable side of the paper is facing up when
loading media into the sheet feeder. See the instruction sheets
packed with the media to determine which side is the
printable surface. Some media have cut corners to help
identify the correct loading direction, as shown in the
illustration.
❏ Make sure the paper stack fits under the arrow mark located
on the inside surface of the left edge guide.
❏ For more information on loading capacities for EPSON
special media, see your online Reference Guide.
Loading Envelopes
When printing on envelopes, please note the following:
❏ You can load up to 10 envelopes in the sheet feeder.
Note:
The folding quality and thickness of envelopes varies widely. If the
total thickness of the stack of envelopes exceeds 10 mm, press each
envelope in the stack flat before loading.
❏ Load envelopes flap edge first with the flap side down.
printable
side up
cut corner