All Power APW5118 - Manual (Page 8)

7
Owner’s Manual
Before Operation
NOTE: The engine and pump on your pressure washer will often have improved
performance after a break-in period of several hours.
PRE-START PREPERATION
Before starting the pressure washer, check for loose or missing parts and for any
damage which may have occured during shipping.
Assembly & Start-Up
HOSE & GUN ASSEMBLY
NOTE: Align threaded connections carefully to prevent damaging threads during
assembly. Tighten connections securely to prevent leaks during operation.
Attach the hose to the inlet on the trigger.
LUBRICATION
Do not attemp to start the pressure washer engine without filling the engine crank case
with the proper amount of oil. Your pressure washer has been shipped without oil in the
crankcase. Operating the pressure washer without oil will ruin the engine. Use oil that is
recommended (10W-30). DO NOT OVERFILL!
FUEL
Fill the tank with unleaded gasoline. Regular gasoline may be used provided a high
octane rating is obtained (at least 85 octane).
Hose
Gasoline is highly flammable and explosive
and you can be burned or seriously injured
when refueling if not carefull.
Gun
Wand