Airlink AWLC011 - Manual (Page 11)

LNK (LINK)
The LNK indicator lights green when the Wireless Cardbus Adapter is
connected to a network successfully. Otherwise the LNK indicator
blinks on and off for three seconds while the Cardbus is scanning for
any available wireless network.
Check the Installation
The LEDs of the Wireless Cardbus Adapter are clearly visible, and the
status of the network link can be seen instantly:
1. Once the Cardbus is plugged into the computer’s Cardbus slot,
the PWR LED will light up indicating a normal status.
2. When the Cardbus and its driver are installed, the LNK LED will
start blinking on and off for three seconds as the Cardbus scans
for any available wireless network.
3. While the Cardbus is connected to an Access Point or to another
wireless client, the LNK LED will remain lit.
4. After all the installations are completed, and the Cardbus is
plugged into the computer, you will see the WLAN Cardbus
Utility icon in the Windows system tray. See Fig 2.2
Fig 2.2
A green utility icon indicates the Cardbus is successfully connected to
a network. A red utility icon indicates the Cardbus is not connected to
any network.
5