Extron electronic MKP 2000 - Manual (Page 19)

MKP 2000 Remote Control Panel • Local Operation
Local Operation, cont’d
MKP 2000 Remote Control Panel
4
Chapter Four
SIS Operation
RS-232 Links
Ethernet Link
Host-to-MKP Instructions
MKP-Initiated (Unsolicited) Messages
MKP Error Responses
Using the Command/Response Table
3-10
Performing a hard reset
The hard reset function restores the MKP to the original factory
default settings, including the default (factory) firmware
configuration and the default IP settings. A hard reset performs
all of the reset-whole-MKP functions, absolute reset functions,
and
erases all user-installed software or firmware. Perform a
hard reset as follows:
Ensure that you have backed up any locally-created
HTML, JavaScript, or other files that you have uploaded
to the MKP’s user file space before you perform the hard
reset. A hard reset will erase all locally-created files
from the MKP.
1 . If necessary, turn off power to the switcher.
2 . Press and hold the Reset button on the rear panel while
you apply AC power to the MKP (figure 3-5).
Power
R
R
Press and hold the
Reset button while you
apply power to the MKP.
The LED flashes
on and off.
Release the Reset button.
Figure 3-5 — Hard reset