AEC Colortronic MTF 3000 Series Granulator - Manual (Page 10)

2.6 Electrical Service Connections
Carefully check the diagrams packed with the machine. All internal wiring has been done at
the factory. All safety interlocks have been verified for proper functioning before shipment.
It is only necessary to connect the electrical power source to the machine at the control
enclosure.
Η Η Η WARNING Η Η Η
All equipment must be grounded in compliance with Article 250
of the National Electric Code and all Local Codes. The customer’s
disconnecting means and branch circuit protection must also be in
compliance with the National Electric Code and all Local Codes.
10